Condensation in BR30+ E27 version and scratches on top

Water or something that is looking like water in the bulbs after using them for half hour.
You have a production problem.
Reason perhaps:
Humidity in production area is to high

you need a high pressure area or a room with air dryer.
Or the BR30 needs a breathable membrane like car headlights.
Perhaps vacuum is possible.

Scratches seems to be made from a conveyer belt. Scratches are only in one direction, like something pulled it over a not smooth or not cleaned surface.

But the main problem is the water.

I’ve sent your feedback to our hardware engineering team. I’ll let you know if they have any further questions.

Meanwhile have you contacted about these? Our customer support team is much more practised at dealing with production issues such as these.